Ion Laser w/Power Supply, Innova 300, Coherent, Argon, For Parts

Description

Ion Laser w/Power Supply, Innova 300, Coherent, Argon, For Parts
Used Coherent Innova ion laser and power supply in non-operating condition. We connected water and powered up the system and it was determined that the plasma tube is 40 Vdc over-pressure. We are selling the unit for parts or repair. While the unit was powered up we wrote down most of the readings on the control pendant and they are listed below.
THIS ITEM IS BEING SOLD AS-IS!
Tube model 160-867-00A, mfg 1990
Power supply:
Watercooled, 2.2 GPM
Remote control pad
Communication ports:
Analog interface IEE 488
RS232/422
208 VAC 60 amps 3 phase
Laser dimensions: 49 x 6 x 7"
Power supply dimensions: 21x 22 x 8"
Test Results:
The unit was supplied with 3 GPM water and 208V three-phase power.
All LEDs on power supply were lit except the HK power LED
The readout shows amp draw was 45 Amps and the cooling water outlet was warm
After 20 minutes a very faint beam was emitted, but the tube power never increased above 0.00 W.
Below are the readings from the digital display during operation
Tube: P = 0.00 W, V = 271.1V,  I = 45.1
AF Delta 43.9
Passbank: 8.4V , Max 45A
Photocell temp: 43.4 deg
Cathode: I = 25.7A
Magent: I = 5.6A
PTA: 511
PTB: 509
Tube hours: 2500
Specifications:
MFG:       Coherent
Model:     Innova 300
Serial:     Z1639
Volts:      208
Amps:
Phase:    3
Year:      1989
Drive:
Controls:
Manuals:
Air:
Weight:   210 Lbs
Condition: Used
Length:   56
Width:     28
Height:    10
All dims inches unless otherwise noted
Inventory #: 5463
Location: Wiggle Rack @ PRB
WE SHIP INTERNATIONALLY
contrary to the Ebay
statement
that says we only ship to united states.
Contact us for shipping quotes
International purchases: A documentation processing fee will be added to total purchase for items under 0.
Our company return policy is that our description is guaranteed and we will accept returns in the event an item is mis-described.
When communicating with us please use your own email address.  We want to know who we are communicating with and we cannot identify specific emails in our inbox using the ebay email system.
Send emails to heritageequipment AT gmail . com
The new ebay buyer protection program has inspired us to offer all of our items “as-is”.
This does not mean that you are buying a machine with deficiencies, known or unknown.
What it means is that some of our items will be tested and will include the results in the description and others will be untested but described accurately to the extent that is possible without actually powering up the machine.
In addition to this written description you will have the opportunity to view high quality photos of the item.
With these two sources of information you will have as much information as possible without being physically here to inspect the machine.
Feel assured that we will make a diligent effort to give you an accurate description of the equipment.
As a buyer you should be aware that you are buying an expensive piece of equipment at a greatly reduced price and as such you may have to deal with certain unknowns and defective components which were not known and could not be known without full scale setup and operation of the machine.
Our experience in dealing with many specialized pieces of equipment has proven this to be a rare occurrence however it is a risk inherent in buying used equipment.
The very few times we have had to deal with these issues we have been very helpful in resolving the problem.